Marine Water Hose

Series 100
        Premium Water Hose Hardwall                
A premium water hose that is resistant to sea water,
mild acids, toilet effluent, hot engine water, and
external abrasion. Constructed with helical wire 
embedded between 2 plies of synthetic fabric for 
maximum flexibility. 
SIZE 1/2" I.D. thru 1-3/8" I.D. 
DESC. Black with green stripe. 
PACKAGING 12-1/2ft. lengths. 50 ft. coils

Series 101
         Premium Sanitation Hose 
The premium sanitation hose designed for most critical 
toilet and holding tank connections with maximum
resistance to toilet effluent and odor. Constructed
with wire helix embedded between 2 plies synthetic
fabric for maximum flexibility. 
SIZE 3/4" I.D. thru 1-1/2" I.D. 
DESC. Black with green stripe. 
PACKAGING 12-1/2 ft. lengths. 50 ft. coils

Series 110
        Premium Water Hose Softwall
A premium water hose that is resistant to sea water,
mild acids, toilet effluent, hot engine water, and 
external abrasion. 2 ply construction where wire helix
is not necessary for light bends.
SIZE 1/2" thru 1-3/8" I.D.
DESC. Black with green stripe.
PACKAGING 12-1/2ft. lengths. 50 ft. coils.

Series 120
        Bilge Pump Hose
A corrugated polyethylene hose resistant to oily bilge
and sea water. Designed for live well aerators, 
bilge discharge, sink, and shower drains.
Durable, flexible, and abrasion resistant.
SIZE 5/8" I.D. thru 1-1/2" I.D.
DESC. Black or White
PACKAGING Bulk cartons. 50 ft. P/O cartons.
 Standard poly bags.

Series 130 / 160
        Standard / Extra Heavy Duty
                                Water Hose  
EPDM heater hose, 2 ply polyester reinforced for
engine heater hose, heat exchanger, air conditioner 
circulation, and bilge. Also good for sink, icebox, 
shower, and live well drains. Meets or exceeds
SAE 20R3. Series 160 is an extra heavy duty hose
with 4 ply construction for critical water application 
where high strength and durability are most important.
SIZE 1/2" I.D. thru 1-1/2" I.D.
DESC. Black with white letters
PACKAGING Bulk coils. 50 ft. P/O cartons. 
Standard poly bags.

Series 141
        Lightweight Vinyl with Black Helix
A highly flexible FDA formulated clear PVC/ black 
helical-tubing for potable water fill, sink, bilge pump, 
shower, icebox, and live well drains (above the waterline).
SIZE 3/4" I.D. thru 1-1/2" I.D.
DESC. Clear with black helix.
PACKAGING 100ft. coils. 50 ft. P/O cartons.

Marine Exhaust Hose

Series 200
    Certified Wet Exhaust Softwall SAE J2006 R1
Certified wet exhaust, heavy wall reinforcement with 2, 4, or 6 plies
of synthetic cord. Designed for engine water circulation, heat, 
heat exchanger, heavy duty discharge lines and  straight marine
wet exhaust connections. Meets or exceeds USCG, ABYC, 
and SAE J2006 R1  standards for wet exhaust service. Recommended 
for short straight connections.
SIZE 1-1/2" I.D. thru 16" I.D.
DESC. Black with blue stripe.
PACKAGING 50 ft. coils thru 3". 12-1/2 ft. lengths.

Series 250
        Certified Wet Exhaust Hardwall SAE J2006 R2
Certified wet exhaust, heavy wall with helical wire reinforcement
between (4) plies of rayon fabric. Compounded to resist engine heat,
exhaust fumes, ozone, mild acids, toilet effluent, salt water, and 
abrasion. Meets or exceeds USCG, ABYC, and SAE J2006 R2 standards
for wet exhaust service.
SIZE 1/2" I.D. thru 8" I.D.
DESC.   Black with blue stripe.
PACKAGING   50 ft. coil thru 8" I.D. 12-1/2 ft. lengths.

Series 252
        Corrugated Wet Exhaust SAE J2006 R2
Corrugated wet exhaust, heavy wall with helical wire reinforcement
between (4) plies of rayon fabric. Compounded to resist engine heat,
exhaust fumes, ozone, mild acids, toilet effluent, salt water, and
abrasion. Meets or exceeds USCG, ABYC, and SAE J2006 R2 standards 
for wet exhaust service. Available for Severe-Bend Applications.
SIZE 1-1/2" I.D. thru 8" I.D.
DESC. Black with Blue stripe.
PACKAGING 50 ft. coil thru 4" I.D. 12-1/2 ft lengths..

Marine Fuel Hose

Series 315
    "Flex-Alcohol" Alcohol Resistant Type B Fuel
Excellent resistance to heat, ozone, and permeation by 
alcohol blended gasoline and diesel fuels. Compounded 
to meet or exceed SAE J1527 Type B, USCG - Type B, USCG
and NMMA standards for fuel feed and vent hoses. Multiple 
plies of reinforcement provide superior flexibility and good 
bend radius.
SIZE 1/4" I.D. thru 5/8" I.D.
DESC. Black with red lettering.
PACKAGING 250 ft. coils. Standard P/O cartons. Standard poly bags.

Series 350 - 360
    "Flex-Alcohol" Alcohol Resistant Type A Fuel.  
Excellent resistance to fire, heat, ozone, and permeation by 
alcohol blended gasoline and diesel fuels. Compounded to
meet or exceed SAE-J1527 Type A, ISO/DIS 7840, USCG and
NMMA standards for fuel feed, fill and vent hoses.
1-1/2" I.D. thru 2-3/8" I.D. has wire helix for excellent flexibility.
SIZE 1/4" I.D. thru 2-3/8" I.D.
DESC. Black with red lettering or stripe.
PACKAGING. 250 ft. coils 1/4" thru 1/2". 150 ft. coils thru 5/8". 100 ft. coils thru 3/4".
Standard P/O cartons. Standard poly bags.

Marine Vent-Ducting Hose

Series 400
    Blower Vent
PVC blower vent hose supported by copper plated wire helix 
and resistant to ozone, sunlight and weathering. Does not
support combustion.
SIZE   3" I.D. thru 4" I.D.
DESC.  Black or white
PACKAGING 50 ft. cartons. Standard poly bags.

Series 420
        Blower Vent - Heavy Duty
Heavy duty PVC blower vent hose with vinyl coated wire helix per
UL specifications. Resistant to ozone sunlight and weathering.
Will not support combustion.
SIZE  3" I.D. thru 4" I.D.
DESC.  Black
PACKAGING  Bulk Cartons.

Series 460
    Non - Insulated A/C Ducting
Heavy duty PVC fabric reinforced A/C ducting with nylon and a metallic 
helix to insure maximum air flow and minimum condensation. Resistant
to ozone sunlight. Manufactured to meet or exceed UL Class 1 standards 
of flame resistance.
SIZE 3" I.D. thru 7" I.D.
DESC. Gray
PACKAGING   25 ft. lengths. Bulk packaging.

Series 480
        Insulated A/C Ducting
Insulated A/C ducting manufactured to meet or exceed UL Class 1
standards of flame resistance.
SIZE 3" I.D. thru 7"
DESC. Aluminized exterior with heavy fiberglass insulation.
PACKAGING 25 ft. lengths. Bulk packaging.

Marine Hose Accessories