Parker Brass Ball Valves

The forged body ball valve provides extended service life and resists failure caused by severe temperature applications. Optimum flow design assures maximum system efficiency. Highly inert PTFE seats and seals provide resistance to chemical corrosion. Parker also provides a blow-out proof stem, chrome plated brass ball and a specially designed handle enabling increased turning leverage for ease of opening and closing. Parker’s ball valve can be readily identified assuring high quality engineering and reliability.

Applications
For use as fuel line shutoffs for gasoline and diesel powered over the highway, off highway, and construction equipment vehicles. Water and air service lines on capital equipment and plant design plumbing that require total shutoff capability.

Parker Carbon Steel Ball Valves

The carbon steel ball valves have a hex shaped body for easy installation. Highly inert PTFE seats and seals combined with an external phosphate coating provide superior corrosion resistance. Parker also provides a blow-out proof stem and a specially designed handle enabling increased turning leverage for ease of opening and closing. Parker’s ball valve can be readily identified assuring high quality engineering and reliability. This economical ball valve is available in female pipe sizes.

Applications
For use as fuel line shutoffs for gasoline and diesel powered over the highway, off highway, and construction equipment vehicles. Hydraulic and general industrial applications on capital equipment and plant design plumbing that require total shutoff capability.

Stainless Steel Ball Valves

The Cast Body is manufactured from CF-8M Stainless Steel, the cast equivalent of 316 Stainless Steel. They are ideal for corrosive environments such as chemical plants and refineries. The full flow design assures maximum operating efficiency. The reinforced PTFE seats and seals, coupled with the 316 Stainless Ball and blow-out proof stem, result in the utmost reliability.

Applications
Applications include chemical plants, refineries, steel mills, industrial fuel lines and agricultural equipment. Meets material requirements of NACE MR-01-75.

Additional Ball Valves and Componentry

Mini Ball Valves

The Mini-Valve is to be used in confined and hard to reach applications. The Brass extruded body allows for extended service life and is chrome plated as standard. Features of the MV608/609 valves include blowout proof stem, hard chrome plate ball, PTFE seats, viton stem seals, and standard yellow handle. MV200 valve features a black lever handle.

Stem Extender Kits
Stem Extenders can be attached easily to any standard size Parker Ball Valve. Kits are available in 1-1/4" and 2-1/4" clearances for Parker Brass Ball Valves up to 1" and Parker Stainless Steel Ball Valves up to 2". All stem extender components are made from 300 Series stainless steel.

Rotary Actuator
A reliable dual vane actuator delivering maximum torque in a small envelope size. Torque output is uniform in both directions, with zero backlash for precise positioning, and guaranteed zero external leakage.

Replacement Componentry
In addition to standard lever handles, most Parker Ball Valves are available with Short Lever Handles, Oval Handles, Tee Handles and Handle Covers.

Plug Valves
Compact brass valve with internal nitrile seals and 1/4-turn, one-piece stem/handle. All valves are 100% leak tested and certified leak free to one SCCM.

Needle Valves
Brass valves with metal-to-metal seats and fine-thread screwdown for positive sealing up to valve capacity.

Truck Valves
Brass valves with metal-to-metal seats and fine-thread screwdown for positive sealing up to valve capacity.

Lanyard Valves
Compact brass valve designed for releasing condensate from air tanks. Specially formulated low temperature seal remains elastic down to -40ºF.

Access Valves
Designed to offer convenient low cost access ports for refrigeration service.

Polypropylene Ball Valves