ATO(Autofuse) Blade Fuse
Currently found
on most cars, trucks, buses and off road
vehicles world-wide.
Voltage Rating Characteristics:
32V AC/DC Fast-Acting
Approvals:
UL listed, CSA certified 3-30A, SAE
J1284. |
OEM Heavy Duty Electronic Flasher • Replaces 12 volt, two or three terminal flashers. (Note: Third
terminal operates pilot light,
not ground.) • OEM replacement. • Ideal for extreme heat or cold conditions. • Upgraded electrical contact materials for increased life. • Non-polarized. |
|
MINI
Blade Fuse
Introduced to meet the OEM need
to protect a greater number of circuits without
utilizing
more space.
Voltage Rating
Characteristics: 32V AC/DC
Fast-ActingApprovals:
UL
listed, SAE J2077 |
.
AG Fuses
Originally stood
for "all glass." The automotive industry uses the "AG"
prefix (AGC, AGW) for most glass fuses.
They vary in length, diameter and
amperage rating.
Voltage Rating:
32V
AC/DC
SFE Fuses
Glass fuses
designed to specifications set by the Society of Fuse
Engineers.
All are 1/4 inch in diameter, but vary in length according to
the
ampere rating to ensure accurate fuse replacement. Both AG and
SFE
fuses were designed into North American vehicles prior to 1981.Glass fuses
are also used for auto accessory applications.
Voltage Rating:
32V
AC/DC
GBC Fuses
A ceramic type,
torpedo shaped fuse that can be currently found in many European cars.
Consisting of a heat resistant body, the fuse element
stretches
over the exterior from
end to end. The body varies in
color to assist in proper replacement.
Voltage Rating:
32V
AC/DCFUSES |
|
MAXI
Blade Fuse MAXI Fuses are primarily used for under hood applications
and
are produced with a high temperature polymer and silver
plated blades. They replace the commonly used fusible
wire or fusible link to protect a high current segment
or
system of the wiring harness.
Voltage Rating Characteristics:
32V
AC/DC Slo-Blo Approvals:
UL listed, SAE J1888. |
Fuse Tester and Puller
The Tester/Puller
conveniently and easily tests
ATO and MINI
Blade
Fuses either in or out of the fuse
block. Indicator light on tester glows
bright green when fuse is good.
Fuse
puller end allows for easy fuse
removal and replacement. 24V
maximum. |
Tri-Puller
Fuse
Puller
Tri-Puller
Fuse
Puller allows for easy fuse removal and replacement of
Glass
Fuses, Ceramic Type Fuses, ATO
and MINI
Blade
Fuses |
|