OEM specified. All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4" to 1" (6mm to 25mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly.
 
Suggested Applications:
Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs

SILICONE

 

General-purpose, clear RTV indoor/outdoor sealant. Seals, bonds, repairs, mends and secures glass, metal, plastics, fabric, vinyl, weatherstripping and vinyl tops. Protects and repairs electrical wiring. May be applied to horizontal or vertical surfaces. Waterproof and flexible. Temperature range -80°F to 450°F; resists oil, water, weather, vibration, grease. 
Suggested Applications: Windshields, door frames, electrical connections, vinyl tops, seams and roofs

ANTI-SEIZE

 A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing and to assure easier disassembly. Temperature range: -60°F to 1600°F. Salt, corrosion and moisture resistant - ideal for marine use. Non-aerosol version meets Mil Spec #907E. Level 3
Suggested Applications:
For easy removal of spark plugs, cylinder head and exhaust head bolts.

SEALANT

 OEM specified. Locks and seals threaded fittings. Resists leakage, vibration loosening, moisture, hydraulic fluids and diesel fuels. Lubricates threads for easy assembly and disassembly. Won’t shred or wear like Teflon® tape. Parts may be repositioned up to 4 hours after application.
 Suggested Applications: Head bolts into through holes, oil PSI sending units and sensors, oil and coolant lines, fuel fittings, rear axle fill plug, brake and power steering fittings

 OEM specified. Formulated specifically for metal, tapered pipe thread fittings, High Performance Thread Sealant replaces Teflon® tape and pipe dopes. Cures rapidly to withstand 10,000 PSI. Perfect as a replacement for Vibra-Seal® pre-coated parts. Prevents galling and protects mated threaded areas from rust and corrosion. It is certified to ANSI/NSF Standard 61 for use in potable water systems.
 Suggested Applications:
Stainless steel fittings, head bolts into through holes, oil PSI sending units/sensors, oil and coolant lines, intake manifold switches, rear axle fill plug, fuel fittings
  * Contains more Teflon particles for greater sealing power.
* Use on metal, PVC, CPVC, and ABS plastic pipe threads.
* For sealing water, air, steam, natural gas, LP gas, refrigerants, ammonia, gasoline, and oil.
* Do not use on Oxygen service, use PTFE Tape or Oxytite® Paste.
* Washes off hands and clothing easily.
* Non-toxic, non-drying.* Sealing temperature range: -50°F to 500°F (-46°C to 260°C).
* Working Pressures: 3,000 PSI (204 BAR ) for Gas, 10,000 PSI (680 BAR) for liquids.* USDA approved for use in federally inspected meat and poultry plants.

• A resin based brushable paste which remains permanently flexible, adheres to internal surfaces and fills voids
• Ideal for metal and plastic materials subject to extreme vibrations
• Effective in temperatures from -200°F (-93°C) to 400°F (204°C), full vacuums and pressures to 10,000 PSI

Leak Lock can be used on all metal or plastic materials, including but not limited to, aluminum, aluminum alloys, cast irons, copper, copper alloys, (brass, bronze, etc...), magnesium and magnesium alloys, carbon steels, stainless steels, galvanized surfaces, PVC, CPVC, ABS, fiberglass, black polypropylene, and kynar. Leak Lock should be applied to threaded joints, flanged joints, gasket surfaces and all mating surfaces where a fluid-tight seal is required.
Leak Lock seals a broad range of chemicals including all refrigerants such as R-12, R-22, R-502, R-134A, etc., all CFC, HFC and HCFC refrigerants, petroleum products, natural and manufactured gases, steam, water, air, etc. No other sealant offers the application range of Leak Lock. Use alcohol as a cleansing solvent prior to setting.

GASKET SEALANTS / GASKET MAKERS

 
Slow drying, non-hardening sealant designed for sealing cut gaskets and stamped parts. Allows for easy disassembly if required. Temperature range -65°F to 400°F; resists common shop fluids and fuels. Use where sealing is more important than adhesion. 
Suggested Applications:  Valve cover gaskets, oil pan gasket

  Slow drying, non-hardening brush-top sealant approved for use in aviation as well as automotive applications. Temperature range -65°F to 400°F; resists gasoline, oil and grease.
Suggested Applications: Close-fitting machined surfaces, sealing hoses, solid gasket dressing